12 Effective Ways to Take Care of a Manual Car Engine To Stay Excellent
Cars are a means of transportation that is currently probably the most used by us. Cars are used as vehicles everyday for activities. Therefore, we should have to stay in top shape. To maintain the condition of the car to remain good and durable, of course, maximum and comprehensive care is needed. Manually caring for a car engine is very important for us as car owners.
All cars require regular maintenance, both used and newly purchased. This also applies to manual cars. Many people who have manual cars, don’t know how to take care of them, eventually they take care of the manual car in no detail, of course this will cause damage to the car’s own engine.
Of course this doesn’t want to happen to your car right?
Here are 10 Effective Ways to Take Care of a Manual Car Engine To Stay Excellent:
1. Check the Car Starter
Try to turn on the car, if the car cannot start, there is damage inside. This can be due to reduced supply of fuel or air. Check the filter by removing it with a brush or toothbrush. If you have done this, but your car has not turned on the engine, immediately take your car to the nearest garage.
2. Filling Car Oil Routinely
Oli is a very important supporter of the car. In order for your car’s engine to be maximal and remain excellent, you must routinely make oil changes. Provisions for oil changes usually vary by type of car. However, usually the change of car oil is done when it has traveled a distance of 3000 kilometers to 5000 kilometers.
The oil in addition to maintaining the performance of the car’s engine is also a barrier to the friction of the components inside the car’s engine. Be sure to choose oil that suits your car’s engine needs. If you don’t understand it, you can consult the mechanics of the nearest workshops.
Also pay attention to the use of power steering oil. Because, if the power steering oil is almost gone, it will cause the steering wheel to become heavy and difficult when you drive it. One of the most obvious signs when your power steering oil starts to run out is the sound on the pump when your car turns.
Brake oil conditions also need attention. Brake oil must be between the LOW and HIGH marks. If your brake oil is on LOW, don’t immediately add brake fluid. First check the condition directly, because the decrease in brake fluid marks can also occur due to thinning of the brake on or brake lining.
3. Check Radiator or Coolant Fluid
The function of the radiator is to neutralize heat in the engine or as an engine cooler. Therefore, make sure to regularly check your radiator water. Because if your radiator water is empty it will overheat the engine and damage it.
Empty radiator water can also harm the driver of the car. So it is very important to do routine checks on radiator fluid. How to check radiator water is by looking directly through the radiator cap.
What you need to know about Radiators
- Do not occasionally open the radiator cap when the engine is on or the engine is still hot.
- It is recommended to replace or drain radiator water when it has traveled 1,000 kilometers.
4. Cleaning the Carburizing Filter
If the car is hard to turn on, it’s a sign that the carburizing filter is dirty. You can clean it by using a toothbrush to remove dirt and crust attached to the carburizing filter. Do not use a hairdryer or compressor when cleaning the carburizing filter because this can cause the risk of damage to the carburizing filter of your car.
5. Check the Belt Timing
Timing belt serves to continue the rotation of the gears connected to the internal parts of the engine. The characteristic that a broken Timing belt is if there is a buzzing or noise when the car is turned on.
Damage to the beft timing belt will cause the timing belt to break so that certain components of the engine become damaged. In addition, electricity supply to the accumulator will not work optimally.
6. Check the Exhaust Condition
The exhaust serves to remove gas from the remains of the vehicle. Check the exhaust condition routine on your car. Also make sure there are no things clogging so that the flow of your car’s gas disposal will be smooth.
7. Replace the Original Car Spare Parts
If there is a component damage in your car’s engine, you will immediately repair it in an official workshop. In addition, if you need to replace components in your car. Be sure to buy original and high quality to prevent damage to the components again.
8. Perform Gas Withdrawal Occasionally
Cars that have been used for a long time will have crust on the engine, so every now and then run your car at high speed to remove crusts on the engine parts of the car. the crust will come out through the exhaust. However, make sure the conditions around where you drive are safe and quiet.
9. Perform a Tune Up Routine
Tuning up in the workshop can keep your machine durable. In the tune up process, the vital components of your car’s engine will be thoroughly inspected.
10. Meet the Car Gas Tank
This seems trivial, but if the gas tank is never fully charged, it can cause the top of the tank that has never been exposed to liquid full of dirt and crust. This dirt or crust is very dangerous if it is mixed with fuel and carried into the combustion channel. Therefore, occasionally fill your car’s gas tank fully, so that the top of the tank is clean and protected from crust.
11. Electricity System
Also pay attention to the electrical system in your car, especially if the car you are using already uses a CDI system.
12. Car Engine
Take care of the cleanliness of your car’s engine in order to avoid various hazards later. When cleaning, make sure there are no machine components removed. To get rid of dirt or crust that is strongly attached to the machine, you can use the dgrease enginee which is widely sold in the market.